ETI Part Number:
ETI0001-2228E
Rugged 1500 VA Rackmount Global UPS
Upgrade Replacement for:
NSN: 6130-01-513-9514
NSN: 6130-01-570-4941
NSN: 6130-01-550-7647
NSN: 6130-01-543-3013
NSN: 6130-01-486-6483
NSN: 6130-01-477-9912
NSN: 6130-01-372-7400
NSN: 6130-01-456-6013
DRS UPSI P/N: 1500TR-III
Naval Sea Systems Command P/N: 7550761-1-2
Boeing P/N: 72B245023-102
Tactical UPS® Rugged Rack Mount 1.5 kVA UPS
Autoranging Global Isolated Input Accepts 90-264 VAC, 46-70 Hz
Input PFC, Battleshort, Manual Bypass, Elapsed Time
Plus Front Access Hot Swappable Battery Module
ETI0001-2228E Rugged Mil Spec UPS Standard Front Panel Layout
ETI0001-2228E Rugged Mil Spec UPS Standard Rear PanelLayout
The field provenTactical Power® UPS line is ideally suited for military,industrial, computer and telecommunications applications requiring high reliability, ruggedconstruction, compact size and light weight design. These units are equallysuited for use in shipboard, airborne, vehicular, field deployed or fixedlocations with controlled or uncontrolled environments. The
ETI0001-2228E is specifically designed for lightweightglobal powerbythe US Navy as thepower source for critical systems because of the stringent performanceand reliability requirements.
The heavy-duty chassis, occupying only 5.25”(3U) of rack space while delivering up to 1500 VA of clean, uninterruptible power. Therounded metal corners and rugged handles frontand rear, aid in safe handling. Internally, all major components are wellsecured and electrically insulated to prevent damage due to shock andvibration. These units can be mountedhorizontally or vertically. Optional heavy-duty rack slides provideeasy installation and removal of the unit with full extension.
The internal shielded input transformerprovides galvanic isolation with provisions for both domestic(120 VAC, CONUS) and international (240 VAC, OCONUS) input voltages. Theautoranging input voltage selection allows inputting either 120 VAC or 240 VACwithout having to open the UPS enclosure.Special EMI/RFI filters and inputpower factor correction minimize both input current and harmonics. Theunit also operates as a frequency converter, taking 46-70 hertz input andconverting it to clean, uninterruptible 60 hertz power. Optionally, 46-440hertz input as well either 50or 400 hertz outputs are available.
The LED arrays keep the operatorinformed as to the unit's status including load and battery levels. The ElapsedTime Indicator records the number of operational hours for records andscheduling preventative maintenance of attached equipment. The front panel alsoprovides easy access to both the AC Input and Battery Input fuses. Coupled withthe adjacent spare fuses, MTTR is reduced to less than 15 minutes.
The internal intelligent thermalsensors provide two stage monitoring of unit temperatures, with both local andremote Battleshort override capability of thermal shutdown. Battleshort can beengaged via the front panel control, via a remote contact input or via asoftware command. When in Battleshort, an audible alarm is sounded and anindicator is lit. Thehigh intensity audible alarm can be heard in high noise environments andincludes an audible enable/disable switch.
Allcontrols and protective devices are brought to the front and rear panels with criticalswitches or circuit breakers having finger guards. Further, all front panel devices are recessed toprevent damage or accidental operation. Clips on the front panel hold sparefuses for ready access. Theinput circuit breaker and the galvanic isolation transformerall provide a double pole isolated source for all installations including shipboard systems oroverseas locations where phase references and grounding are not consistent. Themanual bypass feature included is operated from the front panel. Even in thebypass mode, the
ETI0001-2228E stillprovides galvanic isolation, transient surge protection and EMI/RFI filtering.
The
ETI0001-2228E has the added benefit ofhaving a field replaceable battery via front drawoutbattery module. The battery is a true hot-swappable module and does notrequire going to bypass like competing units. Even with this batterymodule removed, this UPS can continue to operate as an electronic powerconditioner and frequency converter, providing clean, well regulated, sinusoidalpower to the load.The batteries are maintenance free with immobilized electrolyte and areconstructed of flame retardant materials for added safety. For more information, see the BatteryTechnology section.
The rear panel provides locking connectors for the inputand output power with various optional configurations available. Thetwo Status connectors provide an interface with optional computer softwareproviding loss of AC and low battery status as well as remote shut downcapability.
Thisunit draws air through the front air filter and exhausts out the rear vent into the rack.This allows the unit to be used in negative or neutral pressure racks. Forpositive pressure racks, rear to front or rear to side versions are available. The removable and washable metal screen air filters and high capacitystainless steel ball bearing fans provideadded protection in both controlled and hostile environments.
See the Power Distribution Units section for alisting of stand alone PDUs. See the N5 Series section forversions of UPS with an integrated PDU and remote control.
Overall, the Tactical Power line is uniquely qualified for criticalshipboard, vehicle, airborne or land based systems combining advanced modular designfeatures with highly reliable construction.
AC OUTPUT | |||
Output voltage: | 120 VAC true sinewave output standard 100, 110, 115, 120, 127 VAC selectable output settings |
||
Output rating: UPS | 1500 VA, 1050 watts standard For 1000 VA, 700 watts, see ETI0001-2227E For 2000 VA, 1400 watts, see ETI0001-2229E |
||
Non-linear load capacity: UPS | Up to 100% non-linear load capability w/o derating | ||
Output voltage regulation: UPS | ± 3.0% static regulation of nominal ± 4.0% dynamic (0 to 50% load step) |
||
Overload surge capacity: UPS | 110% for 10 minutes; 125% for 30 seconds | ||
Harmonic distortion: UPS | Less than 5.0% into 100% non-linear load | ||
Output frequency: UPS | Selectable 60 Hz or 50 Hz ± 1.0% 400 or 1000 Hz output available as an option |
||
Operational status | AC Input status, UPS operational, UPS alarm, Battery level, Low battery, Load level, Overload, Warm temperature, Hot temperature, Manual bypass and Battleshort LEDs, Elapsed time hour meter Alarm contacts for Loss of AC and Low Battery +90 dB audible alarm with audible on/off switch |
||
AC INPUT | |||
Input voltage selection: | Autoranging from nominal 120 VAC to 240 VAC | ||
Input voltage tolerance: UPS | 90-264 VAC @ full load without using battery | ||
Input frequency: | From 46 Hz to 70 Hz standard, optional to 440 Hz | ||
Input power factor: | 95% typically at full load |
||
Input/output isolation: | 1500 VA, up to 120 dB common mode, <5.0 mA leakage | ||
Input transient suppression: | Complies with IEEE 587, UL 1449 and Mil Std 1399 | ||
Input control/protection: | Guarded 2 pole 100 G shock rated circuit breaker (CB1) plus UPS input fuse (F2), spare fuse on front Manual bypass switch to force bypass mode |
||
Input power connections: | One IEC 60320-C14, 3 pin, others optional | ||
Input power cable: | One 6 ft (1.83 m) with IEC 60320-C13 on one end and NEMA 5-15P plug on other end, others optional | ||
INTERNAL BATTERY | |||
Internal | Maintenance free immobilized electrolyte, Flame retardant materials (Oxygen Index 28+) |
||
Internal | Rated for continuous service life of 5 years | ||
Internal | Front panel mounted fuse (F1), spare fuse on front | ||
Internal battery time: | Standard battery module: 8 minutes @ 1050 watts load, Optional battery module: 14 minutes |
||
Internal battery recharge: | Recharged to 95% in <5 hours | ||
Internal battery replacement: | Hot swap drawout/plug-in module from front of unit <3 minutes to change battery modules |
||
Battery expansion: | Up to 24 hours w/ optional Battery Expansion Modules | ||
DISTRIBUTION PANEL | |||
Output circuits: | Six AC outputs standard, several optional configurations | ||
Output control: | Optional remote control panel w/switches available | ||
Output receptacles: AC output | |||
MECHANICAL | |||
Dimensions (H x D x W): UPS | 5.25 (3U) x 23.5 x 19.0 in (133 x 597 x 483 mm) | ||
Rack Slide Mount Patterns: | Jonathan, General Devices patterns standard, others optional | ||
Alternate Mounting Options: | Table, Wall, Floor, Portable, Horizontal/Vertical | ||
Unit weight: UPS and Standard Battery UPS only Standard Battery Module only Optional Battery Module only |
77 lb. (35 kg) with lift handles front and rear 50 lb. (23 kg) with lift handles front and rear 27 lb. (12 kg) with lift handle in front 37 lb. (17 kg) with lift handle in front |
||
Audible noise: | Less than 50 dB @ 5.0 ft., ANSI "A" scale | ||
Cooling type: | High capacity, negative pressure, forced air | ||
Cooling air direction: | Front intake, exhaust to rear, others optional | ||
Air intake filter: | Washable metal filter media, others optional | ||
ENVIRONMENTAL | |||
Storage temperature: | -40° to 158° F ambient (-40° to 70° C) with fully charged batteries | ||
Operating temperature: | -4° to 131° F ambient ( -20° to 55° C), lower/ higher optional | ||
Operating humidity: | 0 to 95% relative humidity (non-condensing) | ||
Storage elevation: | Up to 49,212 ft (15,000 m) | ||
Operating elevation: | Up to 15,000 ft (4,572 m), higher optional | ||
STANDARDS | |||
United States: | Meets UL-1778 standard for UPS equipment, MIL STDs 167-1, 454, 810, 901D Grade A, 1399-300A & 2000 |
||
Canada: | CSA C22.2 No. 107 UPS safety requirements | ||
EMI Protection: | EMI/RFI FCC Part 15, Class A; EN55022 | ||
OPTIONAL ACCESSORIES | |||
Emergency Power Off, Alternate I/O Configurations, Dual Source Input, Battery Expansion, Batteryless Operation, Battery Charger/Conditioner, Power Distribution Units, Software Interface, 10BaseT Ethernet SNMP/HTTP port, Transport Cases, Slides and Mounting Kits |